Inox Retailer/Distributor inquiries
Contact Inox Sales Representative
Inox Products
 |
|
PREMIUM GRADE ULTRA EXTREME PRESSURE MACHINERY ASSEMBLY AND BEARING LUBE - PIPE AND THREAD ANTI-SEIZE |
|
Engine & Cylinder Head Assembly
Injection Mould Tool Lubricant Mechanical & Electrical Equipment Assembly Thread & Pipe Anti - Seize Extreme Pressure Anti - Friction Applications Contains Anti - Corrosion Additives |
||
|
INOX mx-7 is a specially formulated Extreme Pressure Lithium based grease containing a high percentage of Polytetrafluoroethylene (PTFE) designed for Ultra Extreme Pressure Lubrication and where tough Thread Anti-Seize applications are required. INOX mx-7 provides high film strength, protects against start up damage in new and reconditioned machinery after long down periods before initial startup. INOX mx-7 gives long term lubrication to parts and machinery that are difficult or impossible to lubricate after assembly. INOX mx-7 allows for more even torque pressures and faster breakouts of joints, gaskets and threads INOX mx-7 contains anti-corrosion additives. |
||
TECHNICAL DATA |
||
| TEST |
ASTM METHOD | |
| NLGI | 0 | |
| Lithium Soap, % mass | 4.7 | |
| Colour | Light Brown | |
| Texture | Smooth | |
| Operating Temperature Range, °C | -20 to 180 | |
| Penetration at 25° C Worked 60 strokes |
D.217 |
370 typical |
| Dropping Point, °C | D.2265 | 190 |
| Oxidation Stability - Pressure Drop at 100 hr, kPa |
D.942 |
30 |
| Rust Test | D.1743 | Pass |
| Timken, OK Load, kg | D. 2509 | 24 |
| 4-Ball EP Weld Point, kgf | D.2596 | 350 |
| 4-Ball Wear Scar, mm | D.2266 | 0.48 |
| Base Oil Specification - Viscosity, cSt at 40 °C |
D.445 |
190 |
| Teflon (Polytetrafluoroethylene) %wt | 12 | |
| Solubility in Water | < .1 g/l | |
INOX mx-7 is currently available in 125g tubes & 18 kg drums |
||